Xcel Energy Heat Pump Rebate
Xcel Energy
About This Program
The Grant Map catalogs Xcel Energy Heat Pump Rebate in its La Crosse, WI research directory. The record carries audience tags for homeowners; those tags do not establish eligibility or current service coverage.
Xcel Energy provides rebates for qualifying air-source and ground-source heat pumps installed in electrically heated homes. Rebate amounts vary based on system efficiency and type. Must be installed by licensed contractor and meet minimum efficiency standards.
Rebate amount varies by heat pump type and efficiency rating
The cited program-specific URL responded on 2026-09-15; confirm current terms.
Record set last reviewed 2026-06-09. How we verify our data.
Other published resources for La Crosse, WI, are listed below. Review each separately and ask the administrators whether they can coordinate funding for the same work:
- FEMA Hazard Mitigation Grant Program (HMGP) Varies, no individual cap; projects typically $10K-$200K+
- FEMA Increased Cost of Compliance (ICC) Coverage Up to $30,000
- HUD Lead Hazard Control & Healthy Homes Varies by jurisdiction, typically $5,000-$15,000 per unit
- EPA / WIIN Act Lead Service Line Replacement Local lead-service-line replacement assistance varies; contact your water utility
Key Details
- Rebate up to $2,100 for heat pump installation
- Available to Xcel Energy electric customers
- Covers air-source and ground-source heat pumps
- Must meet minimum efficiency standards
- Licensed contractor installation required
How to Apply
Confirm the current application route with the administrator. Verified official forms and steps appear below when available.
Prepare your application
Review the likely documents and download a blank preparation checklist. The blank PDF does not include saved personal details.
Xcel Energy pays a rebate when you install a qualifying high efficiency electric heat pump, and the rebate amount depends on the equipment and your state (the largest programs are in Colorado and Minnesota). You apply through Xcel Energy's online Digital Application portal (your contractor can also submit it for you), and Xcel pays you by check or your contractor applies the credit to your invoice.
Steps to apply
- Confirm your new heat pump qualifies for an Xcel Energy rebate in your state and keep the paid contractor invoice plus the equipment specification sheet or AHRI certificate.
- Go to xcelenergy.com/digital_application and start the Digital Application (about six sections, roughly 14 minutes).
- Enter your Xcel Energy account information and the installed equipment details.
- Attach your paid invoice and the equipment specification documents, then submit online.
- Check the box to have a copy emailed to you, since the print and download option is no longer offered, and wait for the rebate check or invoice credit.
Documents you will likely need
- Xcel Energy account number
- Paid contractor invoice showing the installed heat pump and total cost
- Equipment specification sheet or AHRI certificate showing model and efficiency rating
- Installation date and installer or contractor information
Already sent us your project details? Sign in to download a preparation sheet with those details. For supported VA programs, you can also get a partially completed official form.
Open my application toolsRequirements vary by program and locality. Confirm the exact rules and application route with the administrator. We can help you prepare your paperwork, but you submit it yourself.
Some programs require contractor estimates, licenses, or inspections. A cited link may be general, so confirm the current rules with the administrator before hiring; a directory match does not guarantee contractor eligibility or funding.
Our record indicates a licensed contractor may be required
The published data we have indicates a licensed-contractor requirement and possibly a written estimate. Confirm both with the administrator before requesting an introduction in La Crosse.
Get matched with a contractorEach administrator sets its contractor rules. Confirm exact requirements directly; the cited URL may be a general agency page.
Deadline: Ongoing, subject to annual budget
Questions about this program?
Email us at no charge. Replies may be automated and are for information only. For a decision on your application, contact the program administrator.
Email us about this programReport a problem with this listing
Frequently asked questions
What amount is listed for Xcel Energy Heat Pump Rebate in La Crosse, WI?
The Grant Map record states: Rebate up to $2,100. Confirm the current amount and eligible costs with the administrator.
What audience tags are recorded for Xcel Energy Heat Pump Rebate in La Crosse?
The directory record carries audience tags for homeowners. It also carries a no-income-limit tag. These tags do not establish eligibility; confirm the complete current rules with the administrator.
How do I apply for Xcel Energy Heat Pump Rebate in La Crosse, WI?
Confirm the application route directly with Xcel Energy; use the cited source on this page as a starting point or call (800) 895-4999. Confirm any fee or cost with the administrator.
Need a Contractor for This Project?
Browse local listings or request an introduction. The Grant Map does not guarantee licensing, program experience, work quality, or funding.
Rebates and supplies for this project
Explore free rebate resources and optional shopping links. Check current terms and compare total costs before you buy.
Find More Programs in La Crosse, WI
This is one of several kinds of assistance that may be available. Review other programs separately and confirm whether their administrators allow coordination for the same work.
See All Programs